TB-RV 5XL
Hier steht eine kurze Beschreibung zum Produkt. Hier steht eine kurze Beschreibung zum Produkt. Hier steht eine kurze Beschreibung zum Produkt. Hier steht eine kurze Beschreibung zum Produkt. Hier steht eine kurze Beschreibung zum Produkt. Hier steht eine kurze Beschreibung zum Produkt. Hier steht eine kurze Beschreibung zum Produkt. Hier steht eine kurze Beschreibung zum Produkt.
€359,00
Product Description
Hier steht eine ausführliche Produktbeschreibung. Auch können hier Dokumente verlinkt werden. Hier steht eine ausführliche Produktbeschreibung. Auch können hier Dokumente verlinkt werden. Hier steht eine ausführliche Produktbeschreibung. Auch können hier Dokumente verlinkt werden. Hier steht eine ausführliche Produktbeschreibung. Auch können hier Dokumente verlinkt werden. Hier steht eine ausführliche Produktbeschreibung. Auch können hier Dokumente verlinkt werden.
This product is also available in a food compliant manner – please contact us for further information.
Power transformers | 60-100 MVA |
---|---|
Application opjective | Drying incoming air |
Use according to ATEX 2014 / NEC50 | No |
Operating environment | Indoor / below deck, Outdoor / on land |
Substance in container | Class 1: Hydraulic oil, gear oil, biological oil, vegetable oil, transformer oil |
Installation | Hanging |
Handling | Rechargeable |
Housing | Plastics |
Sealing | FKM |
Valves | Yes (IN-OUT) |
Connections | DIN42562 |
Structure and added value

1DIN connections:
Available with all DIN connections
2Sustainability:
Refillable version ensures favorable operating costs
3Filter:
Clean supply air due to integrated 2μm fibre glass filter
4Self regeneration:
Increase in utilization times through the use of activated carbon
5Desiccant:
Efficient desiccant with harmless color indicator from orange – green
6Valves:
Protection against unnecessary loading. Valves ensure long service life
Method of operation

Adsorber – supply air filtration
- Level in transformer decreases
- Humid air is sucked in
- Valves open at 5 mbar
- Uniform flow
- Air is dried up to 2%rH
- Silicagel changes color
- Air is filtered up to 2μm
Dry and clean supply air
Desorption – Separation oil particles
- Level in transformer increases
- Dry, oily air is squeezed out
- Activated carbon absorbs all oil particles
- Dry, oil-free air regenerates silica gel
Self regeneration and oil-free exhaust air
Technical Data

Flowchart
The sucked-in air opens the valves in the lower part of the adsorber already at approx. 5 mbar. After flowing into the adsorber, the air is distributed evenly over the cross-section. A pre-filter disc removes coarse dirt particles from the air.
When the desiccant silica gel flows through, the water molecules are reliably removed from the air. The gap volume of the granulate is optimally selected with 2 to 5 mm grains and guarantees a minimum pressure build-up with simultaneous very good drying efficiency. Thus, at the beginning of the drying process, a residual air humidity of max. 2 % rH and a dew point of -40 °C are achieved. Due to the water absorption, the silica gel in the standard turns from orange to green, indicating the end of the product life cycle. 3 µm filter pad ensures that all dirt particles are separated from the ambient air and the silica gel and that the connected transformer is not contaminated.
In the case of outgoing air, the activated carbon prevents contamination of the silica gel and thus blocks the water-absorbing pores, allowing the adsorber to self-regenerate.
These adsorbers are made of aluminum, polycarbonate, polyamide, silica gel orange, FKM and can be used for the ventilation of all transformers by means of all DIN connections.
Pressure ratio

