The sucked-in air opens the valves in the lower part of the adsorber already at approx. 5 mbar. After flowing into the adsorber, the air is distributed evenly over the cross-section. A pre-filter disc removes coarse dirt particles from the air.
When the desiccant silica gel flows through, the water molecules are reliably removed from the air. The gap volume of the granulate is optimally selected with 2 to 5 mm grains and guarantees a minimum pressure build-up with simultaneous very good drying efficiency. Thus, at the beginning of the drying process, a residual air humidity of max. 2 % rH and a dew point of -40 °C are achieved. Due to the water absorption, the silica gel in the standard turns from orange to green, indicating the end of the product life cycle. 3 µm filter pad ensures that all dirt particles are separated from the ambient air and the silica gel and that the connected transformer is not contaminated.
In the case of outgoing air, the activated carbon prevents contamination of the silica gel and thus blocks the water-absorbing pores, allowing the adsorber to self-regenerate.
These adsorbers are made of aluminum, polycarbonate, polyamide, silica gel orange, FKM and can be used for the ventilation of all transformers by means of all DIN connections.