Find Dealer

Product Description


Product flyer
Food Conformity Sample
Customs information
EAC Template
REACH Compliant
IP Protection Class IP 63
RoHS Compliant
Corrosivity Class C5
CE Conformity
CAD data and more files on request

Structure and added value

Increase in utilization times through the use of activated carbon

Clean supply air due to integrated 3μm filter

Efficient desiccant with harmless color indicator from orange to green

4Sloshing protection:
Prevents oil droplets from entering the desiccant

Simple replacement of the entire adsorber

Protection against unnecessary loading ensures long periods of use

Method of operation

Adsorption – drying of the supply air

  • The level in the system decreases
  • Humid air is sucked in
  • Valves open at approx. 5 mbar
  • Uniform flow through the adsorber
  • Air is dried to 2%rH
  • Silica gel changes color
  • Air is filtered to 3μm

Dry and clean supply air

Desorption – Separation of oil particles

  • The level in the system increases
  • Dry, oily air is squeezed out
  • Activated carbon absorbs oil mist
  • Dry, oil-free air regenerates the silica gel
  • Silica gel partially recolors

Self-regeneration and oil-free exhaust air

Technical Data


The sucked-in air opens the valves in the lower part of the adsorber already at approx. 5 mbar. After flowing into the adsorber, the air is distributed evenly over the cross-section. The pre-filter disk frees the air from coarse dirt particles already at this point.

When the desiccant silica gel flows through, the water molecules are reliably removed from the air. The gap volume of the granulate is optimally selected with 2 to 5 mm grains and guarantees a minimum pressure build-up with simultaneous very good drying efficiency. Thus, at the beginning of the drying process, a residual air humidity of max. 2 % rH and a dew point of -40 °C are achieved. Due to the water absorption, the silica gel in the standard turns from orange to green, indicating the end of the product life cycle. At the end, a 3 µm filter ensures that all dirt particles are separated from the ambient air and the silica gel and that the connected system is not contaminated.

In the case of the outgoing air, the two-stage slosh protection prevents larger oil droplets from penetrating the desiccant. This is supplemented by the activated carbon, which adsorbs the finest oil particles and thus enables the adsorber to regenerate itself.

Adsorbers of the VV-DV series are made of polycarbonate, polyamide, silica gel orange, FKM and can be used for aeration of all common hydraulic and gear oils and lubricants, fuels, isocyanates.

Pressure ratio


For privacy reasons YouTube needs your permission to be loaded. For more details, please see our Privacy Policy.
I Accept
For privacy reasons YouTube needs your permission to be loaded. For more details, please see our Privacy Policy.
I Accept

This product is compatible with